Hisense/Onn/TCL/Philips Roku TV Won’t Turn On [2025 Solutions]

Roku TVs are known for providing seamless entertainment with a user-friendly interface. But what happens when your Roku TV refuses to power on? It’s frustrating, we know. The good news? This issue can often be resolved with a few troubleshooting steps. Whether you own a Hisense, Onn, or TCL Roku TV Wont Turn On, this guide will walk you through possible causes and solutions. By the end, your TV will be up and running, and you’ll be back to binge-watching in no time.

Why Won’t My Hisense/Onn/TCL Roku TV Wont Turn On?

If your Roku TV isn’t powering on, it could be due to power supply issues, remote control problems, or software glitches. To help you diagnose and resolve the problem quickly, we’ve broken it down into simple steps.

Start Here: Press the Physical Power Button on the Roku TV

Before jumping into the solutions, locate your Roku TV’s physical power button (usually at the bottom center or back of the TV). Press it to see if the TV responds. This will help confirm if the issue lies with the TV itself or the remote control. If your TV still doesn’t turn on, proceed with the solutions below.

Read More: Universal Remote Codes For Roku TV

Solution 1: Inspect Your TV’s Power Supply

The first and most important thing to check is the power supply. If your TV isn’t receiving power, it won’t turn on no matter what you try.

Plug the Roku TV into a Working Outlet

Test the wall outlet you’re using by plugging in another device, like a lamp or phone charger. If the outlet isn’t working, switch to a different one. It’s also worth checking if any circuit breakers have tripped.

Verify the Connection

Make sure the power cord is securely connected both to the wall outlet and the TV. Inspect the cord for any visible damage or fraying, as this could prevent your TV from getting the power it needs. If everything seems fine but your Roku TV still won’t turn on, it’s time to look at the next potential issue.

Solution 2: Examine Your Roku Remote

The remote control could be the source of the problem. If it’s not sending signals to your Roku TV, your TV might not power on.

Change the Remote’s Batteries

Sometimes, the simplest solution is the right one. Replace the batteries in your remote and try powering on your TV again.

Reset the Remote

If new batteries don’t help, your remote might need a reset. To do this, remove the batteries, press and hold the power button for 10 seconds, and then reinsert the batteries.

Repair the Remote with Your Roku TV

Some Roku TVs require the remote to be paired. Hold the pairing button (found inside the battery compartment) for a few seconds until the pairing light starts flashing. Follow the on-screen pairing instructions to reconnect your remote.

Remove Any Obstructions

Make sure nothing is blocking the line of sight between the remote and the TV. Although some Roku remotes use Wi-Fi, others still rely on standard infrared signals, which can be interrupted by obstacles.

Consider Replacing the Roku Remote

If you’ve tried everything and the remote still doesn’t work, it may be defective. Consider purchasing a replacement remote or using the Roku app to control your TV via your smartphone.

Solution 3: Investigate Software and Hardware Problems

If the power supply and remote aren’t the issues, the problem might be tied to the TV’s software or hardware.

Perform a Power Cycle on Your Roku TV

Unplug your Roku TV from the wall outlet, wait 10–15 seconds, and then plug it back in. Power cycles can resolve temporary software bugs that may be preventing your TV from turning on.

Factory Reset Your Roku TV

When all else fails, performing a factory reset may resolve deeper software issues. Find the reset button (usually a small pinhole on the back of the TV), press it with a paperclip for about 15 seconds, and wait for the TV to reboot. Keep in mind this will erase all settings and preferences.

Contact the Manufacturer of Your TV

If your TV still won’t turn on after trying all these steps, it may be a hardware issue. Reach out to the manufacturer for further assistance or consider contacting a professional repair service.

Roku TV Won’t Turn On FAQs

Q: What should I do if my Roku TV powers on but shows no picture?

A: If your TV powers on but the screen stays black, double-check the HDMI connections and try restarting your TV.

Q: Can I control my Roku TV without a remote?

A: Yes! Download the Roku mobile app on your smartphone for full control over your TV.

Q: Can I fix the power issue myself, or do I need professional help?

A: Many power issues can be fixed at home with basic troubleshooting. However, if the problem persists, it’s best to consult your TV’s manufacturer or a repair technician.

Q: How long is the warranty for most Roku TVs?

A: Many Roku TVs come with a one-year limited warranty, but this can vary depending on the manufacturer.

Q: Why does my Roku TV keep turning off by itself?

A: This could be due to settings like timers, software glitches, or overheating. Check your settings and software updates, and power cycle the TV if necessary.

Wrapping Up

A non-working Roku TV doesn’t mean the end of your entertainment experience! By following these simple solutions, you can troubleshoot and resolve most issues quickly. From checking your power supply to resetting your remote or TV, it’s all straightforward and typically just takes a few minutes. If your Roku TV still isn’t cooperating after these steps, contacting the manufacturer is your best bet. However, most cases won’t get to that point—so don’t worry!